The way to Reform the Lubrication Technique of raymond mill?

Right after long-time operation of raymond mill, the lubrication of its gear will become worse. The transformation of lubrication procedure can properly avoid the excessive wear because of the lack of oil so as to obtain a great lubricating effect. The measures are as follows:
1. Change the place of spray plate.
Change the place of spray plate into modest gear observation hole in the lubrication method. Keep a thirty ° angle and 150mm ~ 200mm straight-line distance concerning the gear and plate. Soon after adjusting the place of spray plate to the upper area, the small gear includes a greater lubrication effect, and it passes the oil movie towards the large gear as a result of the engagement involving gears, which properly stay away from the wear and tear of gear triggered by lacking of oil.
2. Modify the spraying object to small gear.
The dress in in between gears is mutual. Even when the hardness of small gear is increased compared to the large one, its dress in is over the huge gear. Difficulties generally begin from smaller gear to the significant one, because the pace and frequency of tiny gear is virtually 10 times larger than the big one. Consequently, we must spray the little gear to be able to give additional safety to your major gear.
3. Adjust the brand of lubricating oil.
G．BESLUX CROWN Heavy MILL would be the mixture of composite aluminum thickener and high refined mineral oil. It really is a whole new sort of long-lasting additive that incorporates distinct polymer. It's also an excellent lubricant which has robust adhesion, prolonged duration and better lubrication impact.